Engine Services

• For testing diesel compression pressure

• High quality hydraulic pressure gauge provides accurate reading and prevents damages on gauge due to high pressure

• Glow plug adapters are helpful when diesel injectors are difficult to remove because of carbon deposits

• Provided with a 90-degree adapter for fitting gauge to injector (or glow plug) adapter in limited spaces

• Includes 4 injector adapters and a universal injector adapter kit (contained in small box). The clamp-on adapters offer more applications on truck, van, bus, marine, and agricultural machinery

• Set for pulling off seals, O-rings or tiny parts

• Includes a crankshaft seal puller for removing seals on crankshaft pulley by leverage force

• Special tip angle provides a wide application

• No space limitation

• Tool for separating old sealant on oil pan

• High quality SK-5 blade provides satisfactory sealant separation

• Can also use on cylinder head cover, transmission pan, differential covers and other sealant joints in a vehicle

• Includes a bronze blade as a replacement. Ideal for aluminum alloy oil pan as it avoids damages on pan surface

• Provided with cleaning pads (15 pcs) for cleaning pan surface

• Air hammer powered tool to remove seized or obstructed O2 sensors

• Swivel head for easier positioning during installation and operation

• Air hammer creates vibration that makes it easier to loosen the O2 sensor

• 22 mm / 7/8” internal hex for universal application, specifically used on the
O2 sensor located at the chassis

• 30 mm external hex to hold the socket while using the air hammer

• Kit for testing vacuum in intake manifolds, automatic transmissions, fuel control, EGR, air conditioning and heating system

• Also available for brake bleeding: one-person operation

• Includes a 200 ml reservoir bottle for bleeding brake fluid

• Provided with a pack of adapters for different brake bleeder valves and vacuum tests

• Apply to all automotive multimeters and extended lines of probe for oscilloscope

• Easy connections offer fast checking on electric circuits

• Probes pierce through insulated materials on wires, minimizing risks of oxidation

• Wire checking clip is useful for checking wires that are in limited access locations

• Apply to all automotive multimeters and extended lines of probe for oscilloscope

• Easy connections offer fast checking on electric circuits

• Probes pierce through insulated materials on wires, minimizing risks of oxidation

• Wire checking clip is useful for checking wires that are in limited access locations

• Precise test for engine block and cylinder head when reassembling or overhauling an engine

• Work with a feeler gauge

• Suitable for 4- and 6-cylinder engines

• Tolerance < 0.03 mm

• Long reach pliers to access to limited spaces easily

• Special crossing grooves enable pliers to work from different directions

• Offset design allows pliers reach awkward locations

• Set for testing cylinder compression pressure on gasoline engines

• Provided with mostly common used spark plug adapters, sizes are M10 × 1.00, M12 × 1.25, M14 × 1.25, M16 × 1.50, M18 × 1.50

• Includes aluminum test tubes, fitting in-line and V-shape engines

• Rubber tube equipped with an enhance locking design, preventing the adapter from being left on the spark plug hole when disconnecting the rubber tube

• Easily disconnects hoses by gripping firmly the tubes/lines

• Jaw for 3/16”, 1/4” and 3/8” tubes and lines

• Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible

• Pointed jaw tip allows access to confined spaces

• Lever locking design allows fast gripping

• Probes are provided in straight, 45°, and 90° can access to connectors in limited spaces

• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation

• 6 colors help identify different lines for testing

• Rear end with 4mm banana socket