SD-1150A
• Apply to all automotive multimeters and extended lines of probe for oscilloscope
• Easy connections offer fast checking on electric circuits
• Probes pierce through insulated materials on wires, minimizing risks of oxidation
• Wire checking clip is useful for checking wires that are in limited access locations
• Easy connections offer fast checking on electric circuits
• Probes pierce through insulated materials on wires, minimizing risks of oxidation
• Wire checking clip is useful for checking wires that are in limited access locations
SD-1128
• Long reach pliers to access to limited spaces easily
• Special crossing grooves enable pliers to work from different directions
• Offset design allows pliers reach awkward locations
• Special crossing grooves enable pliers to work from different directions
• Offset design allows pliers reach awkward locations
SD-1028_B
• Set for testing cylinder compression pressure on gasoline engines
• Provided with mostly common used spark plug adapters, sizes are M10 × 1.00, M12 × 1.25, M14 × 1.25, M16 × 1.50, M18 × 1.50
• Includes aluminum test tubes, fitting in-line and V-shape engines
• Rubber tube equipped with an enhance locking design, preventing the adapter from being left on the spark plug hole when disconnecting the rubber tube
• Provided with mostly common used spark plug adapters, sizes are M10 × 1.00, M12 × 1.25, M14 × 1.25, M16 × 1.50, M18 × 1.50
• Includes aluminum test tubes, fitting in-line and V-shape engines
• Rubber tube equipped with an enhance locking design, preventing the adapter from being left on the spark plug hole when disconnecting the rubber tube
SD-1117A
• Easily disconnects hoses by gripping firmly the tubes/lines
• Jaw for 3/16”, 1/4” and 3/8” tubes and lines
• Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible
• Pointed jaw tip allows access to confined spaces
• Lever locking design allows fast gripping
• Jaw for 3/16”, 1/4” and 3/8” tubes and lines
• Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible
• Pointed jaw tip allows access to confined spaces
• Lever locking design allows fast gripping
SD-1154
• Probes are provided in straight, 45°, and 90° can access to connectors in limited spaces
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• 6 colors help identify different lines for testing
• Rear end with 4mm banana socket
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• 6 colors help identify different lines for testing
• Rear end with 4mm banana socket
SD-1155
• Probes are provided in straight, 45°, and 90° can access to connectors in limited spaces
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• Black and red colors help identify different lines when testing
• Rear end with 4mm banana socket
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• Black and red colors help identify different lines when testing
• Rear end with 4mm banana socket
SD-1111C
• Quickly stop fluid when disconnect fuel / oil hoses, for example, fuel lines, A/C lines, power steering & transmission cooler lines, banjo adapters, brake lines
• Suitable for Banjo type and 5/16” fuel / oil lines
• Yellow plugs are available in 3/16”, 1/4” and 5/16” sizes
• Suitable for Banjo type and 5/16” fuel / oil lines
• Yellow plugs are available in 3/16”, 1/4” and 5/16” sizes
SD-1092
• Set for pulling off seals, O-rings or tiny parts
• Special tip angle provides a wide application
• No space limitation
• Special tip angle provides a wide application
• No space limitation
SD-1153
• Probes are provided in straight, 45°, and 90° can access to connectors in limited spaces
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• Black and red colors help identify different lines for testing
• Rear end with 2mm female socket can connect to multimeter probes directly
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• Black and red colors help identify different lines for testing
• Rear end with 2mm female socket can connect to multimeter probes directly
SD-1152
• Probes are provided in straight, 45°, and 90° can access to connectors in limited spaces
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• 6 colors help identify different lines for testing
• Rear end with 2mm female socket can connect to multimeter probes directly
• Super thin probes access to connector back easily between the insulation and weather seal, creating contact on the metal part without damaging the insulation
• 6 colors help identify different lines for testing
• Rear end with 2mm female socket can connect to multimeter probes directly
SD-1151
• Wire checking clip is useful for checking wires that are in limited access locations
• Pierces through insulators on wires by pushing the bar, minimizing risks of oxidation
• RoHS compliant
• Pierces through insulators on wires by pushing the bar, minimizing risks of oxidation
• RoHS compliant
SD-1124S
• 340 mm / 13.4 in length extension drive bar enables easier works in confined spaces, such as water pump, power steering pump, generator, A/C compressor, transmissions and starter fasteners
• Provided with two square drive adapters in 1/4” and 3/8”
• Chain-driven mechanism enhances working durability and smoothness
• Max torque allowed: 130 N m / 96 ft lb
• Provided with two square drive adapters in 1/4” and 3/8”
• Chain-driven mechanism enhances working durability and smoothness
• Max torque allowed: 130 N m / 96 ft lb