Special Sockets

View:

SD-1037B

• Twisted with tapered head helps remove worn, broken, or stripped objects easily

• 12mm hex: 3mm, 1/8″, 4mm, 3/16″, 5mm, 5.5mm, 6mm, 1/4″, 8mm, 3/8″, 10mm

• 16mm hex: 11mm, 12mm, 1/2″, 14mm

• Set for removing a broken stud or internal hex bolt by drilling a hole

• Product NOT designed for air/impact wrench operation

SD-1033A

• Set for removing worn or rusty nuts on studs or bolts

• 3/8"DR: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm

• 1/2"DR: 16mm, 17mm, 18mm, 19mm, 21mm

• For removal only. Do not use twist sockets to install new nuts

• Product NOT designed for air/impact wrench operation

• Use with an open-end wrench

SD-1030D

• Twist sockets for removing worn or rusty nuts

• 3/8" sizes: 8, 10, 12, 13 mm

• 1/2" sizes: 14, 15, 16, 17, 19, 21 mm

• Includes a punch bar to punch stuck bolts/nuts out of socket

• For removal only. Do not use twist sockets to install new nuts

SD-1030E

• Twist sockets for removing worn or rusty nuts

• 1/4" sizes: 6, 8, 10, 11, 12 mm

• 1/2" sizes: 13, 14, 15, 17, 19, 21, 24, 27 mm

• Includes a punch bar to punch stuck bolts/nuts out of socket

• For removal only. Do not use twist sockets to install new nuts

SD-1031

• Twist sockets for removing worn or rusty nuts

• Sizes: 17mm, 19mm, 21mm, 22mm

• Includes a punch bar to punch stuck bolts/nuts out of socket

• For removal only. Do not use twist sockets to install new nuts

• Product NOT designed for air/impact wrench operation

SD-1031A

• Twist sockets for removing worn or rusty nuts

• Sizes: 17mm, 19mm, 21mm, 22mm, 23mm

• Includes a punch bar to punch stuck bolts/nuts out of socket

• For removal only. Do not use twist sockets to install new nuts

• Product NOT designed for air/impact wrench operation

SD-1037E

• Twisted Torx® tip with tapered head helps remove worn, broken, or stripped objects easily

• Sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm

• S2 material for enhanced strength

• Patented in several countries

• Product NOT designed for air impact wrench

SD-1037F

• Twisted Torx® tip with tapered head helps remove worn, broken, or stripped objects easily

• Sizes: T6, T7, T8, T9, T10, T15, T20, T25

• S2 material for enhanced strength

• Patented in several countries

• Product NOT designed for air impact wrench

SD-1037P

• Set for removing worn or rusty inner hex bolt by drilling a hole

• 3/8"DR: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm

• 1/2"DR" 8mm, 10mm, 12mm

• Tool with square drive to work with a ratchet wrench for additional torque

• Product NOT designed for air/impact wrench operation

SD-1036

• Sizes: 2mm, 3mm, 4mm, 6mm, 8mm, 10mm

• Set for removing worn or rusty inner hex bolt by drilling a hole

• Tool with 3/8”Dr to work with a ratchet wrench for additional torque

• Product NOT designed for air/impact wrench operation

SD-1036A

• Sizes: 8mm, 10mm, 12mm, 14mm, 16mm

• Set for removing worn or rusty inner hex bolt by drilling a hole

• Tool with 1/2”Dr to work with a ratchet wrench for additional torque

• Product NOT designed for air/impact wrench operation

SD-1039

• Removes and installs studs without damaging threads

• Includes the most common stud sizes in metric sizes:
M6×P1.0, M8×P1.25, M10×P1.25, M10×P1.5

• Special steel ball design provides energy-saving way of installing new studs