Go-Through Twist Socket Set (13 pcs)
Model No.:
SD-1033A
• Set for removing worn or rusty nuts on studs or bolts
• 3/8"DR: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm
• 1/2"DR: 16mm, 17mm, 18mm, 19mm, 21mm
• For removal only. Do not use twist sockets to install new nuts
• Product NOT designed for air/impact wrench operation
• Use with an open-end wrench
• 3/8"DR: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm
• 1/2"DR: 16mm, 17mm, 18mm, 19mm, 21mm
• For removal only. Do not use twist sockets to install new nuts
• Product NOT designed for air/impact wrench operation
• Use with an open-end wrench
| Package | Blow molded case (red) | |
| Packing | 10 sets in a master carton | |
| Weight per set | 1.0 g | 2.3 lbs |
| Net weight per carton | 10.3 kg | 22.7 lbs |
| Gross weight per carton | 11.3 kg | 24.9 lbs |
| Size per set | 21.9 × 13.5 × 5.9 cm | 8.6 × 5.3 × 2.3 inch |
| Size per carton | 30.0 × 30.0 × 24.5 cm | 11.8 × 11.8 × 9.6 inch |
| Volume per carton | 0.022 CBM | 0.8 CUFT |
| Case label size | 10.5 × 4.5 cm | 4.1 × 1.8 inch |
| Suggested HS code |
82042000004 |
| MOQ with laser marking | 20 sets |
| MOQ without laser marking | 10 sets |
| Laser marking cost | + TWD 2.5 on each piece |
The sockets do not contain any substances of very high concern (SVHC) as per article 33(1) to regulation (EC) No. 1907/2006 (REACH).
Intertek report number TWNH00091443 is available upon request.
