Suspension System

• Special vise for holding cylindrical objects such as shock absorber structs, steering racks, and pistons

• Holes on the vise can be clamped on a working table

• MOQ 200 sets with lead time at least 75 days

• 2 pieces set for holding the heavy-weight hydraulic cylinders in the air to facilitate operations

• Mounting device can be held by the belt included or mounted on a transmission jack

• Retaining holder internal diameter Ø 80 mm

• Belt total length 1.5 meter

• Sturdy holder that can be fixed on a working surface as a working station for spring compressors

• Compatible with most MacPherson spring compressors on the market

• Set for compressing left-hand MacPherson shock absorber coil springs.

• Includes two pairs of C jaws for fitting various sizes (Spring compressor tool is not included)

• Jaw covers are RoHS certified, containing no SVHC materials

• Small C jaws fit to Honda CR-V MK2, 3, 4 front right springs

• Big C jaws fit to Nissan Qashqai MK1 & 2, and Renault Kadjar front left springs

• Special vise for holding cylindrical objects such as shock absorber structs, steering racks, and pistons

• Holes on the vise can be clamped on a working table

• Rubber covers can help protection paints on clamped object

• MOQ 200 sets with lead time at least 75 days

• Suitable for coil springs with internal diameter > Ø 75 mm and external diameter < Ø 155 mm

• Special pins on tool body to mesh with grooves on discs to create a secure connection (see illustration on the right)

• Can be operated with an air/impact wrench

• Provided with product liablity insurance

• Suitable for
- Audi A4, A6
- BMW 3 Series E46, X3 E83, X6 E71, E72, Z3 E36
- Citroen Berlingo, C8, Dispatch
- Fiat Bravo, Croma, Punto, Scudo, Ulysse
- Ford Galaxy, Maverick, Mondeo
- Hyundai Getz, Santa Fe
- Mercedes-Benz A-Class W169, W176, B-Class W245
- Nissan Cube, Leaf, Micra, Murano, Versa
- Opel Astra G/H/J, Corsa B/C, Insignia, Zafira A/B
- Peugeot 207, 807, 5008
- Renault Clio, Espace, Laguna, Thalia
- Tesla Model 3
- Volvo C70, S80, V60, V70, XC60, XC70

• Suitable for working on lower control arm hole diameter smaller than Ø30 mm

• For compressing coil springs on double A and multi-link suspensions

• Mostly on rear suspensions, sometimes on front suspensions (see Application tab below)

• Includes C-shaped devices for tighter connection between the discs and tool strut

• Can be operated with an air/impact wrench with the use of the 100 Nm torque bar

• Break point: 10,180 kgf (99,764 N)

• Maximum load: 4,072 kgf (39,900 N)

• Provided with Product Liability Insurance

• Kit for compressing MacPherson shock absorber coil springs

• Jaws width can be adjustable, fitting different sizes of coil springs

• Break point 5,800 kgf (ca. 56,800 N)

• Max. load 2,318 kgf (ca. 22,700 N)

• Safety locks can fix the compressor more securely on the coil spring

• Provided with Product Liability Insurance

• Set for compressing MacPherson shock absorber coil springs

• Includes three pairs of C jaws for fitting various sizes

• Includes an extension bracket for conical springs

• Break point 4,275 kgf (about 41,900 N)

• Max. load 1,710 kgf (about 16,760 N)

• Provided with Product Liability Insurance

• Set for removing shock absorber caps

• Includes a large variety of sockets with various sizes

• Provided with bits with special sizes

• DO NOT use with an air/impact wrench

• Set for compressing coil springs on multi-link and independent arm suspension systems

• Suitable for both front and rear shock absorber springs

• Telescopic spindle length: 383 mm

• Break point: 14,900 kgf (ca. 146,000 N)

• Max. load: 5,959 kgf (ca. 58,400 N)

• Kit for compressing MacPherson shock absorber coil springs

• Jaws width can be adjustable, fitting different sizes of coil springs

• Break point 5,800 kgf (ca. 56,800 N)

• Max. load 2,318 kgf (ca. 22,700 N)

• Can work with an impact wrench

• Provided with Product Liability Insurance