2026 New Products

• Designed for removing and installing 7.8 liter engine fuel filters on Isuzu FRR, FSR, FTR, FVM, FVR, FVZ ... etc

• Size: 120.5 mm - 8 flutes - 1/2” square drive

• Compatible with fuel filter housing 8-98092482-1

• 3 liter manual tank with 2 adapters specificially designed for Tesla all models

• Tank with measuring scale for precise refill on Tesla gearboxes

• Hose with internal wire spring does not get kinked

• Cap on the tank side for pouring new ATF / gearbox oil into the tank

• Adapter cap to connect on cooling system expansion tank for leak pressure tests

• M32 × 2.0 reverse threaded

• Suitable for Hyundai and Kia Low-Conductivity Coolant (LCC) / “blue” coolant loop for cooling high voltage battery pack

• Fuel filter tool for use on Davco Fuel Pro® 48X series fuel/water separators

• Compatible with Cummins, Detroit Diesel, International / Navistar, Mack, Kenworth, Peterbilt, and Volvo trucks

• 8-inch inner diameter with a comfortable handle for efficient and easy operations on removing and installing the filter collars and vent caps

• Fuel filter tool for use on Davco Fuel Pro® 380 and 382 series fuel/water separators

• Compatible with Caterpillar , Cummins, Detroit Diesel, International / Navistar, Mack, Mercedes-Benz Truck, Kenworth, Peterbilt, and Volvo trucks

• 6-inch inner diameter with a comfortable handle for efficient and easy operations on removing and installing the filter collars and vent caps

• Nylon test cap to be connected on recovery tank filler necks

• M63 × 4.0

• Suitable for the cooling system recovery tank on Haval Big Dog, Cool Dog, Jolion, Raptor, and GWM Tank 300, Tank 500, Ora EV

• Set for testing engine oil pressure

• Provided with 11 oil pressure switch adapters for the most comprehensive car application coverage on the market, including
- R 1/8” DIN adapter
- 1/8” x 27 NPT adapter
- 1/4” x 18 NPT adapter
- 3/8” x 18 NPT adapter
- M10 × P1.0 adapter
- M10 × P1.25 adapter
- M12 × P1.5 adapter
- M12 x P1.75 adapter
- M14 × P1.5 adapter
- M16 × P1.5 adapter
- M16 x P2.0 adapter

• Also including two oil filter adapters for Mercedes-Benz M271 and M274 when oil pressure switch is very hard to access to

• 1.5 meter long manometer hose makes it easier to connect to oil pressure switches in tight spaces

• Please check the Application tab below for reference. The list is partial - please contact us for more information

• Fuel filter removal tool for use on Mitsubishi Triton 2.5 diesel engines

• Two pieces in a set, the big tool for holding the filter housing, and the small tool for holding the fuel filter sensor

• Big tool size 97.7 mm x 15 flutes x 1/2" square drive
• Small tool size 44.8 mm x 12 sides

• Tool for removing fuel pump locking rings for various car makes and models, for gasoline and diesel engines

• Compatible with BMW, Hyundai, Kia, and Mercedes-Benz, and more

• See more details in the Applications section.

• Heavy duty design with 1/2” square drive to provide sufficient torque when removing stubborn fuel pump lock rings

• 2 pieces wrench set for removing diesel fuel filter housings while protecting the sensors

• Fitting Ford, Mazda, Mitsubishi, Nissan, and Toyota diesel engines. Please check the Application tab below for reference

• 1/2” square drive to provide extra torque when encountering stubborn fuel filters

• Filter wrench size 86 mm x 15 flutes x 1/2" square drive
• Sensor wrench size 50.3 mm x 8 sides

• Kit to apply pressure for leak tests in the cooling system. Automotive cooling system is working in a pressurized environment - any leaks may lead to reduced performance on cooling the engine,
causing engine overheat or related issues

• Provided with an air pressure device for fast pressurizing on large capacity cooling systems

• Includes 9 adapters compatible with heavy-duty vehicles and commercial trucks, including DAF, Ford Trucks, Freightliner, International, Kenworth, Mack, MAN, Mercedes-Benz, Peterbilt, Renault Trucks, Scania, and Volvo Trucks