2025 New Products

• Test caps for major Chinese car makes, including BYD, Chery, Geely, Haval, LDV, and MG

• Made with high quality and sturdy nylon materials

• Caps to connect with a pressure pump (not included) for leak tests

• Caps can also to connect with a vacuum tool (not included) for coolant refill

• Tool for removing fuel pump locking rings for various car makes and models, for gasoline and diesel engines

• Compatible with BMW, Hyundai, Kia, and Mercedes-Benz, and more

• See more details in the Applications section.

• Heavy duty design with 1/2” square drive to provide sufficient torque when removing stubborn fuel pump lock rings

• Fuel filter removal tool for use on Mitsubishi Triton 2.5 diesel engines

• Two pieces in a set, the big tool for holding the filter housing, and the small tool for holding the fuel filter sensor

• Big tool size 97.7 mm x 15 flutes x 1/2" square drive
• Small tool size 44.8 mm x 12 sides

• 2 pieces wrench set for removing diesel fuel filter housings while protecting the sensors

• Fitting Ford, Mazda, Mitsubishi, Nissan, and Toyota diesel engines. Please check the Application tab below for reference

• 1/2” square drive to provide extra torque when encountering stubborn fuel filters

• Filter wrench size 86 mm x 15 flutes x 1/2" square drive
• Sensor wrench size 50.3 mm x 8 sides

• Fuel filter removal tool for use on Hyundai and Kia 2.2 CRDI engines

• For Hyundai Palisade and Santa Fe
• For Kia Carnival and Sorento

• Size 108 mm x 15 flutes x 1/2" square drive

• Fuel filter removal tool for use on Hyundai and Kia 1.6L CRDI engines

• For Hyundai i30, i40, Kona, Tucson
• For Kia Ceed, Optima, Sportage, Stonic

• Size 80.7 mm x 14 flutes x 1/2" square drive

• Application below shows partial fitment. For more information, please contact us directly

• Set for testing engine oil pressure

• Provided with 11 oil pressure switch adapters for the most comprehensive car application coverage on the market, including
- R 1/8” DIN adapter
- 1/8” x 27 NPT adapter
- 1/4” x 18 NPT adapter
- 3/8” x 18 NPT adapter
- M10 × P1.0 adapter
- M10 × P1.25 adapter
- M12 × P1.5 adapter
- M12 x P1.75 adapter
- M14 × P1.5 adapter
- M16 × P1.5 adapter
- M16 x P2.0 adapter

• Also including two oil filter adapters for Mercedes-Benz M271 and M274 when oil pressure switch is very hard to access to

• 1.5 meter long manometer hose makes it easier to connect to oil pressure switches in tight spaces

• Please check the Application tab below for reference. The list is partial - please contact us for more information

• Set for pushing and pulling auto body frames back to the original place with a pneumatic tool

• Pneumatic tool features 5.25 tons of force. No hydraulic fluid is required and no unsafe and unpleasant leaks will occur

• Provided with a remote control with a 2 meter extension hose for extra safety

• Includes attachments for various auto body repair tasks, such as pushing / spreading and pulling / pressing

• 74.3 mm × 14 flutes × 45 mm (height)

• 3/8" drive

• For Mercedes-Benz

• Material: hot rolled steel

• Set for removing exterior and interior trim, molding, dashboards, door panels, and clips

• Each tool is two-sided to increase its applicability and versatility

• Metallic material is not easily damaged or broken, more durable than plastic panel removal tools

• Short-length design, suitable for confined spaces and restricted angles

• Spray gun holder with a strong magnet that attaches to a flat ferrous metal surface

• 4.5 kg capacity magnet

• 50 mm / 2” hook width with protective rubber coating

• Suitable for holding up to 1.5 kg / 3.3 lbs gravity fed spray guns or others objects with similar shapes

• Holders can also be fixed on a surface with the side holes

• One-person operation on brake bleeding by pressurizing the brake system from master cylinder.

• Efficient in pushing out debris from brake system.

• 5-liter / 5.28-quart tank with a safety pressure relief valve.

• Includes a standard European adapter. The application list shown below is for reference only. Contact us for more information.

• Suitable for changing DOT 3 and DOT 4 brake fluids, but NOT SUITABLE for changing DOT 5.1

• One-way valve is fitted in the hose end connector to prevent unsafe brake fluid spills after
disconnecting the hose from master cylinder.