2025 New Products

• Tool for removing fuel pump locking rings for various car makes and models, for gasoline and diesel engines

• Compatible with BMW, Hyundai, Kia, and Mercedes-Benz, and more

• See more details in the Applications section.

• Heavy duty design with 1/2” square drive to provide sufficient torque when removing stubborn fuel pump lock rings

• Set for testing engine oil pressure

• Provided with 11 oil pressure switch adapters for the most comprehensive car application coverage on the market, including
- R 1/8” DIN adapter
- 1/8” x 27 NPT adapter
- 1/4” x 18 NPT adapter
- 3/8” x 18 NPT adapter
- M10 × P1.0 adapter
- M10 × P1.25 adapter
- M12 × P1.5 adapter
- M12 x P1.75 adapter
- M14 × P1.5 adapter
- M16 × P1.5 adapter
- M16 x P2.0 adapter

• Also including two oil filter adapters for Mercedes-Benz M271 and M274 when oil pressure switch is very hard to access to

• 1.5 meter long manometer hose makes it easier to connect to oil pressure switches in tight spaces

• Please check the Application tab below for reference. The list is partial - please contact us for more information

• Set for pushing and pulling auto body frames back to the original place with a pneumatic tool

• Pneumatic tool features 5.25 tons of force. No hydraulic fluid is required and no unsafe and unpleasant leaks will occur

• Provided with a remote control with a 2 meter extension hose for extra safety

• Includes attachments for various auto body repair tasks, such as pushing / spreading and pulling / pressing

• 74.3 mm × 14 flutes × 45 mm (height)

• 3/8" drive

• For Mercedes-Benz

• Material: hot rolled steel

• Set for removing exterior and interior trim, molding, dashboards, door panels, and clips

• Each tool is two-sided to increase its applicability and versatility

• Metallic material is not easily damaged or broken, more durable than plastic panel removal tools

• Short-length design, suitable for confined spaces and restricted angles

• Spray gun holder with a strong magnet that attaches to a flat ferrous metal surface

• 4.5 kg capacity magnet

• 50 mm / 2” hook width with protective rubber coating

• Suitable for holding up to 1.5 kg / 3.3 lbs gravity fed spray guns or others objects with similar shapes

• Holders can also be fixed on a surface with the side holes

• One-person operation on brake bleeding by pressurizing the brake system from master cylinder.

• Efficient in pushing out debris from brake system.

• 5-liter / 5.28-quart tank with a safety pressure relief valve.

• Includes a standard European adapter. The application list shown below is for reference only. Contact us for more information.

• Suitable for changing DOT 3 and DOT 4 brake fluids, but NOT SUITABLE for changing DOT 5.1

• One-way valve is fitted in the hose end connector to prevent unsafe brake fluid spills after
disconnecting the hose from master cylinder.

• Set for holding the heavy-weight hydraulic cylinders in the air to facilitate operations

• Mounting device can be mounted on a transmission jack

• Retaining holder internal diameter Ø 80 mm

• Set for holding the heavy-weight hydraulic cylinders in the air to facilitate operations

• Mounting device can be held by the belt under a shock absorber spring, brake caliper bracket, or a lower control arm

• Retaining holder internal diameter Ø 80 mm

• Belt total length 1.5 meter

• 2 pieces set for holding the heavy-weight hydraulic cylinders in the air to facilitate operations

• Mounting device can be held by the belt included or mounted on a transmission jack

• Retaining holder internal diameter Ø 80 mm

• Belt total length 1.5 meter

• Heavy duty construction tool for removing oil filter canisters on Iveco trucks and van

• 107.3 mm x 15 flutes

• 1/2" square drive to allow sufficient torque required to remove large size oil filter canisters

• Use a manual wrench with this fuel filter wrench. DO NOT use an air/impact wrench

• Heavy duty construction tool for removing oil filter housings on MAN trucks and buses

• 135.7 mm x 18 flutes

• 1/2" square drive to allow sufficient torque required to remove large size oil filter housings

• Use a manual wrench with this fuel filter wrench. DO NOT use an air/impact wrench