SD-1150
• Kit includes connectors and terminals for testing major automotive electric systems
• Can be used with a digital multi-meter
• Universal application
• Can be used with a digital multi-meter
• Universal application
SD-1124B
• Height only range from 17.0 - 20.2 mm / 0.6 - 0.8 inch
• Low profile suitable for working in limited spaces
• High quality Cr-Mo material
• Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 mm
• Low profile suitable for working in limited spaces
• High quality Cr-Mo material
• Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 mm
SD-1117C
• Easily disconnects hoses by gripping firmly the tubes/lines
• Jaw for 3/16”, 1/4” and 3/8” tubes and lines
• Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible
• Pointed jaw tip allows access to confined spaces
• Screw locking design enhances secure gripping
• Jaw for 3/16”, 1/4” and 3/8” tubes and lines
• Especially suitable for hoses connected to tubes or lines with smooth surface, where exercising pushing force is not possible
• Pointed jaw tip allows access to confined spaces
• Screw locking design enhances secure gripping
SD-1845
• This diagnostic set is to inspect low pressure or return fuel side of diesel engines
• Two manometers with different scales (-1 - 5 bar and -1 - 15 bar) offer more accurate test results
• Ten fuel line adapters cover a wide range of diesel engines and car makes
• Translucent tube on adapters help observe impurities and bubbles in the fuel
• 2 meter long hoses help connections in confined areas in engine compartment
• Two manometers with different scales (-1 - 5 bar and -1 - 15 bar) offer more accurate test results
• Ten fuel line adapters cover a wide range of diesel engines and car makes
• Translucent tube on adapters help observe impurities and bubbles in the fuel
• 2 meter long hoses help connections in confined areas in engine compartment
SD-1111
• Quickly stop fluid when disconnect fuel lines, A/C lines, transmission cooler lines, and brake lines, for Banjo type and 5/16” size
• Long reach hose pincher for pinching small hoses fast and effortless
• Yellow plugs are available in 3/16”, 1/4” and 5/16” sizes
• Long reach hose pincher for pinching small hoses fast and effortless
• Yellow plugs are available in 3/16”, 1/4” and 5/16” sizes
SD-1016
• For testing return fuel volume on common rail low pressure system
• Mechanics can find which cylinder is faulty without removing injector or a diagnosis computer
• Includes adapters for major injector types: Bosch, Siemens, Delphi and Denso
• Provided with 6 test tubes with lines for easy observation on return fuel volume
• Each scale on test tube indicates 3 ml volume
• Mechanics can find which cylinder is faulty without removing injector or a diagnosis computer
• Includes adapters for major injector types: Bosch, Siemens, Delphi and Denso
• Provided with 6 test tubes with lines for easy observation on return fuel volume
• Each scale on test tube indicates 3 ml volume
SD-1093
• Seal installation with various sizes to fit seal with different sizes
• Tool set to help install seals evenly
• Includes a crankshaft seal puller for removing seals on crankshaft pulley by leverage force
• Special tip angle for removing seals easily
• No space limitation
• Tool set to help install seals evenly
• Includes a crankshaft seal puller for removing seals on crankshaft pulley by leverage force
• Special tip angle for removing seals easily
• No space limitation
SD-1086
• Universal copper washer set with 30 pcs ser size
• Suitable for injectors, drain plugs and other car parts for preventing leaks
• Suitable for injectors, drain plugs and other car parts for preventing leaks
SD-1086C
• Universal copper washer set with 10 pcs ser size
• Suitable for injectors, drain plugs and other car parts for preventing leaks
• Suitable for injectors, drain plugs and other car parts for preventing leaks
SD-1081B
• To re-face diesel injector seats for fitting new or reconditioned injectors by cleaning carbon deposits on injector seats
• Unique double lock design provides safer works and better results
• Sizes - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer, 17 × 17mm angled reamer
• Includes a pilot post and T-handle
• Helps avoid potential risks of blow-by gases
• Unique double lock design provides safer works and better results
• Sizes - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer, 17 × 17mm angled reamer
• Includes a pilot post and T-handle
• Helps avoid potential risks of blow-by gases
SD-1081
• To re-face diesel injector seats for fitting new or reconditioned injectors by cleaning carbon deposits on injector seats
• Unique double lock design provides safer works and better results
• Sizes - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer
• Helps avoid potential risks of blow-by gases
• Unique double lock design provides safer works and better results
• Sizes - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer
• Helps avoid potential risks of blow-by gases
SD-1081A
• To re-face diesel injector seats for fitting new or reconditioned injectors by cleaning carbon deposits on injector seats
• Unique double lock design provides safer works and better results
• Sizes - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer, 17 × 17mm angled reamer
• Helps avoid potential risks of blow-by gases
• Unique double lock design provides safer works and better results
• Sizes - 17 × 17mm flat reamer, 15 × 19mm flat reamer, 17 × 19mm flat reamer, 17 × 21mm flat reamer, 17 × 17mm angled reamer
• Helps avoid potential risks of blow-by gases