2024 New Products

• 3 liter tank with a manual pump for easy refilling gearbox oil p

• Provided with 2 adapters (a soft tube type and a hook type) for fitting most automatic transmission / gearbox fill plug holes

• Hose with internal wire spring does not get kinked

• Cap on the tank side for pouring new ATF / gearbox oil into the tank

• Pressure release button for enhanced safety

• Vacuum-type coolant refill tool has large internal passages to allow coolant to be refilled fast

• Provided with three adapters for Audi, Porsche, SEAT, Škoda and Volkswagen models, including battery vehicles and plug-in hybrid vehicles. Please click "Applications" tab underneath

• With only two valves - easy to use, intuitive design

• Tool with a hook can hang under the hood

• Tool needs to work with an air compressor to create a vacuum in the cooling system

• Kit for repairing damaged, stripped, or worn drain plug hole by renewing the threads with taps provided and new (and bigger) drain plugs with copper washers

• Suitable for cars with M22 × P1.50 drain plugs

• Applicable for Chrysler, Citroen, Dodge, Ferrari, Fiat, Maserati, Peugeot, and Renault

• Also fit to commercial vehicles, such as Astra and Iveco

• Application list below is for reference only. Please contact us for application list with more details

• Set for compressing left-hand MacPherson shock absorber coil springs.

• Includes two pairs of C jaws for fitting various sizes (Spring compressor tool is not included)

• Jaw covers are RoHS certified, containing no SVHC materials

• Small C jaws fit to Honda CR-V MK2, 3, 4 front right springs

• Big C jaws fit to Nissan Qashqai MK1 & 2, and Renault Kadjar front left springs

• Tube type cleaner with compressed air to clean hard-to-access areas,
such as filters and radiator

• 90° angle and 5-port air outlet to increase accessibility and maximize air
pressure and volume

• Super thin 6mm or 1/4" wide tube helps access to tiny spaces in the car

• Ergonomic handle design enables users to control the air direction easily
and work with the tool comfortably

• Adequate length suitable for general cleaning in the engine compartment or chassis

• When a Tesla Model 3 experiences a collision and the electric motor is damaged, the bushing that helps hold the electric motor in place may be damaged and will need to be replaced

• Tool to remove an old bushing or install a new bushing on Tesla Model 3 electric motor

• The black sleeve with a special side cutout specifically design for Tesla
Model 3

• Highly versatile tool kit, provided with a 5 lb slide hammer, for a variety of pulling operations on car

• Including a front hub puller and rear axle puller for most CV axle removal and gear hub bearing replacement

• Including dent puller, and other parts for pulling press-fit parts, such as bushings, bearings, gears, and seals ... etc

• Jaws can be assembled into 2-way and 3-way yokes for pulling either internal or external bearings

• Forged carbon steel used as the primary material that provides high strength and corrosion proof, and is resistant to severe sliding applications

• Vacuum-type coolant refill tool has large internal passages to allow coolant to be refilled fast

• Provided with two adapters for Alfa Romeo, Citroen, Fiat, Peugeot, Renault, and some Opel. Please click "Applications" tab underneath

• With only two valves - easy to use, intuitive design

• Tool with a hook can hang under the hood

• Tool needs to work with an air compressor to create a vacuum in the cooling system