Lubrication System

• Kit for repairing damaged, stripped, or worn drain plug hole by renewing the threads with taps provided and new (and bigger) drain plugs with copper washers

• Suitable for cars with M20 × P1.50 drain plugs

• Applicable for Chevrolet, Dodge, GMC, Honda, Isuzu, and Subaru. Application list below only shows partially. Contact us directly for more applications

• Kit for repairing damaged, stripped, or worn drain plug hole by enlarging the threads with taps provided and new (and bigger) drain plugs with copper washers

• Suitable for cars with M16 × P1.50 drain plugs

• Applicable for BMW, Citroen, Peugeot, Renault, and Subaru

• Kit for repairing damaged, stripped, or worn drain plug hole by enlarging the threads with taps provided and new (and bigger) drain plugs with copper washers

• Suitable for cars with M12 × P1.50 drain plugs

• Applicable for BMW and Mercedes-Benz

• Kit for repairing damaged, stripped, or worn drain plug hole by enlarging the threads with taps
provided and new (and bigger) drain plugs with copper washers


• Suitable for cars with M10 × P1.50 drain plugs:
Citroen / Peugeot (oil pan)
Ford (oil pan)
Land Rover (oil pan)
Mazda (oil pan)
Mini cooper (oil pan)
Volvo (oil pan)
Jeep (transmission pan)
Lexus (transmission pan)
Toyota (transmission pan)

• Kit for repairing damaged, stripped, or worn drain plug hole by enlarging the threads with taps provided and new (and bigger) drain plugs with copper washers

• Suitable for cars with M12 × P1.25 drain plugs

• Applicable for Daihatsu, Lexus, Nissan, and Toyota

• Cordless, battery powered oil suction tool set is easy to carry and move around - no need to connect to electrical cable or shop air

• Includes 3 Panasonic® rechargeable batteries, and a 100 - 240V charging cable

• Special level detection mechanism that shuts off the pump automatically when fluid level reaches to 4.3L to prevent the tank from being overfilled

• Tank capacity: 5.5 liter / 5.8 quart. Special materials that can be made transparent, heat resistant and suitable for extracting engine oil, coolant, and ATF

• Extension tubes with outer diameters in Ø 4mm, 6mm, 8mm, suitable for oil dipstick tubes on different car makes

• Total tube length 2,700 mm / 8.9 ft (main tube connected with an extension tube) can reach oil dipsticks on tall engine bays on SUVs, pickups, and light trucks

• Extension tube storage system and tank lid can be detached easily for cleaning purposes

• Sturdy round base that holds the tank in place and avoid wobbling

• Flexible extension tube can be attached to fluid drums for easy pouring

• A great replacement for funnels, especially when the fill points are hard to reach

• Spout covers included to avoid containments or dusts

• Braid reinforced PVC tube with outer diameter 26 mm / 1”, and inner diameter 19 mm / 3/4”

• Flexible extension tube can be attached to fluid drums for easy pouring

• A great replacement for funnels, especially when the fill points are hard to reach

• Spout covers included to avoid containments or dusts

• Braid reinforced PVC tube with outer diameter 26 mm / 1”, and inner diameter 19 mm / 3/4”

• Flexible extension tube can be attached to fluid drums for easy pouring

• A great replacement for funnels, especially when the fill points are hard to reach

• Spout covers included to avoid containments or dusts

• Braid reinforced PVC tube with outer diameter 26 mm / 1”, and inner diameter 19 mm / 3/4”

• Sockets for removing oil filters with a 3/8" drive

• Suitable for Audi, BMW, Chevrolet, Ford, Hyundai, Kia, Land Rover, Lexus, Mazda, Mercedes, Toyota, Volvo and VW

• Set for refilling engine oil without unsafe spills

• Clamp can be fitted to oil filler necks universally

• Clamp application range: 28-74 mm / 1-1/8”-2-15/16”

• Threaded clamp provides firm fittings on oil filler neck

• Lower transparent chamber shows oil flows down to engine

• Funnel can be molded into different shapes, making refilling or draining easier

• Selected material for engine oil, brake fluid, ATF, and coolant

• Temperature range: -15˚C and 100˚C / 5˚F and 212˚F

• US patented product