Spare Parts

• Aluminum test cap to be connected on recovery tank filler necks

• Suitable for MG engine coolant expansion tanks

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 12 mm

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 10 mm

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 9 mm

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 8 mm

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 1/2" (12.7 mm)

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 7/16" (11.1 mm)

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 3/8" (9.5 mm)

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 5/16" (7.95 mm)

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Removes worn, rusty, or deformed fasteners with a 1/4” output drive

• Size: 1/4" (6.35 mm)

• Length: 65 mm

• For removal only. Do not use twist sockets to install new nuts

• Quick coupler with a female Japanese standard type air plug on one end, and a European standard type air plug on the other end

• To fit brake master cylinder reservoir on Chrysler, Dodge, Jeep, RAM, Mitsubishi Raider

• Aluminum-made adapter holds high pressure, suitable for most pressure bleeding works that require 2 bar / 30 psi