Residual Fluid Collector

This fluid collecting tool is very interesting. It is designed for collecting the remaining tiny bit of oil in the engine oil, brake fluid, gear oil, or automatic transmission fluid (ATF) bottles. We all know that there is always some fluid left in the bottles after we have poured the fluid into the car. The remaining amount is actually significant when the weather is cold, and the viscosity of the fluid is high. You wouldn't want to wait up until the fluid is totally drained from the bottle, and eventually waste quite a big amount of fluid in the long run. 

After using the bottles, simply put the used bottles upside down on the collector part which is located on top of the tool. This collecting area can hold up to 4 bottles at the same time. You can collect oil from the same motor oil grades into the same bottle so you’ll have another new bottle of oil after time, or you can collect the oil from different grades, and you can just use the engine oil for regular lubrication purposes, such as applying on the oil filter housing, gaskets, or seals when installing them. 

The tool has two empty bottles that you can collect, and each bottle has a capacity of 2 liter or 2 quarts. 

The tool set include two anchor bolts that you can fix the tool set on the wall in the service shop or on a metal sheet so it will be handy to access.