-
STEERING SYSTEM REPAIR SET (57 PCS)
▪ For removing and installing bushings and bearings
▪ Hydraulic cylinder provides energy- and time-saving removing and installing works
▪ Includes 4 spindles: M10 x P1.5, M12 x P1.75, M14 x P2.0 and M16 x P2.0
▪ Sleeve sizes: 18-60mm (ID) and 26-68mm (OD) with 2mm increments
▪ Universal application
-
HYDRAULIC STEERING SYSTEM PRESS TOOL SET (47 PCS)
▪ For removing and installing bushings and bearings
▪ Hydraulic cylinder provides energy- and time-saving removing and installing works
▪ Includes 1 M20 x P2.5 spindle
▪ Sleeve sizes: 18-60mm (ID) and 26-68mm (OD) with 2mm increments
▪ Universal application
-
HYDRAULIC STEERING SYSTEM PULL TOOL SET (49 PCS)
▪ For removing and installing bushings and bearings
▪ Hydraulic cylinder provides energy- and time-saving removing and installing works
▪ Includes 4 spindles: M10 x P1.5, M12 x P1.75, M14 x P2.0 and M16 x P2.0
▪ Sleeve sizes: 18-60mm (ID) and 26-68mm (OD) with 2mm increments
▪ Universal application
-
UNIVERSAL SLEEVE REMOVAL AND INSTALLATION KIT PATENTED
▪ For removing and installing bushings and bearings
▪ Equipped with sleeve sizes from 34-66mm (ID) and 44-82mm (OD) with 2mm increments
▪ Includes 4 spindles with two 27mm hex nuts: M10 x P1.5, M12 x P2.0, M14 x P2.0 and M16 x P2.5
▪ Provided with two step discs with two sides (A and B sides). Discs have tracks for fitting all sleeves, without needing several individual step discs
▪ Tool NOT designed to be used with an air/impact wrench
-
TIE ROD END REMOVER AND INSTALLER (Ø45-Ø50mm)
▪ To remove fast and easily worn tie rods and install new tie rods with a 27mm spanner or 1/2″Dr
▪ Special head design grips tie rod end firmly by turning clockwise and anti-clockwise
▪ Application range Ø45-Ø50mm, mainly for Mercedes large cars and light trucks
▪ Tool NOT designed to be used with an air/impact wrench
-
TIE ROD END REMOVER AND INSTALLER (Ø28-Ø35mm)
▪ To remove fast and easily worn tie rods and install new tie rods with a 27mm spanner or 1/2″Dr
▪ Special head design grips tie rod end firmly by turning clockwise and anti-clockwise
▪ Application range Ø28-Ø35mm, mainly for European and Japanese small cars (less than 2,000 cc)
▪ Tool NOT designed to be used with an air/impact wrench
-
TIE ROD END REMOVER AND INSTALLER (Ø35-Ø45mm)
▪ To remove fast and easily worn tie rods and install new tie rods with a 27mm spanner or 1/2″Dr
▪ Special head design grips tie rod end firmly by turning clockwise and anti-clockwise
▪ Application range Ø35-Ø45mm, mainly for European passenger cars
▪ Tool NOT designed to be used with an air/impact wrench